Hosts Parameters
Last updated: 04-Dec-2024
This table describes the general parameters used for Host related configurations.
- Few parameters from Hosts Parameters, are not configurable using SET_PARM command. Refer to Parameters Not Configurable with SET_PARM for more details on the list parameters.
- All the parameters above will have underscore (_) at the end of the name, except the following : SSIPROTOCOLENABLED, PARM_PRIMURL, PARM_SCNDURL, PARM_TID, PARM_MID and CTimeout.
Note
| Config.usr1/Parameter DLD Name | Description | Valid/Max Values | Default Value | Name in PropertiesData.xml |
|---|---|---|---|---|
| CTimeout | This parameter is used to set the duration of time for the device to wait for host response. If the host response is not received in this specified time, then the application ends the connection with Comm Error. | Numeric | 30000 | CommTimeout |
| CURRENCYIDX | This parameter is used to set the index reference to currency used by the host. | Valid Currencies Index Value | 0 | CurrencyIdx |
| CONNECTRETRYCOUNT | This parameter is used to set the maximum number of retry count for the host connection. | Numeric, 1 | 0 | MaxConnectRetry |
| DIALPABX | This parameter is used to set the PBX code for dialed connections. | Numeric, 20 | <blank> | dial/0/pbax_code |
| DIALPHONE | This parameter is used to set the dial-up phone number. | Numeric, 20 | <blank> | dial/0/address |
| DIALTIMEOUT | This parameter is used to set the transaction time out for dialed connections. | Numeric, 5 | <blank> | dial/0/timeout |
| DISCLAIMER1 | This parameter is used to set disclaimer line 1. | Alphanumeric, 40 | I AGREE TO PAY ABOVE AMOUNT ACCORDING | Disclaimer1 |
| DISCLAIMER2 | This parameter is used to set disclaimer line 2. | Alphanumeric, 40 | TO THE CARD ISSUER AGREEMENT | Disclaimer2 |
| DISCLAIMER3 | This parameter is used to set disclaimer line 3. | Alphanumeric, 40 | (MERCHANT AGREEMENT IF CREDIT/VOUCHER) | Disclaimer3 |
| DISCLAIMER4 | This parameter is used to set disclaimer line 4. | Alphanumeric, 40 | [blank] | Disclaimer4 |
| HOSTNAME | This parameter is used to set the host name. | Alphanumeric, 10 | Host specific | HostName |
| HOSTCOMMERRORRETRIES | This parameter is used to set the number of retries required for Host to connect, if comm connect is failing during an online or offline transaction. | Numeric, 1 | 0 | hostcommerrorretries |
| PARM_MID / MERCHANTID | This is the Merchant Gateway ID. This value represents a unique number assigned to a merchant. This number is used for all processing activities. This value can also represent the network gateway through which transactions should be routed. | Alphanumeric 15 | [blank] | MerchantID |
| NETWORKTCPTIMEOUT |
|
Numeric | 3000 | timeout |
| PARTIALAUTH | This parameter is used to enable or disable partial authorization. |
|
1 | PartialAuth |
| PARM_PRIMURL | This parameter is used to set the primary auth URL. | Alphanumeric, 128 | PrimaryAuthUrl | |
| PARM_SCNDURL | This parameter is used to set the secondary auth URL. | Alphanumeric, 128 | SecondaryAuthUrl | |
| PARM_TID | This is for terminal ID. It represents a device from a specific facility, restaurant, or retail location. | Numeric, 8 | 0 | TerminalID |
| PARM_MID | This is the Merchant Gateway ID. This value represents a unique number assigned to a merchant. This number is used for all processing activities. This value can also represent the network gateway through which transactions should be routed. | Alphanumeric, 15 | [blank] | MerchantID |
| PRIMARYCOMMTYPE | This parameter is used to set the primary communication type. |
|
TCP | PrimaryCommType |
| SECONDARYCOMMTYPE | This parameter is used to set the secondary communication type. |
|
NONE | SecondaryCommType |
| TERMINALID | This is for terminal ID. It represents a device from a specific facility, restaurant, or retail location. | Numeric, 8 | 0 | TerminalID |
| PRIMARYTCPADDRESS | This parameter is used to set the primary TCP address. | Alphanumeric, 200 | <blank> | tcp/0/address |
| PRIMARYTCPPORT | This parameter is used to set the primary TCP port. | Alphanumeric, 4 | <blank> | tcp/0/port |
| PRIMARYTCPTYPE | This parameter is used to set the primary TCP type. | Alphanumeric, 4 | <blank> | tcp/0/type |
| PRIMARYTCPTIMEOUT | This parameter is used to set the primary TCP time out. | Numeric, 5 | <blank> | tcp/0/timeout |
| SECONDARYTCPADDRESS | This parameter is used to set the secondary TCP address. | Alphanumeric, 200 | <blank> | tcp/1/address |
| SECONDARYTCPPORT | This parameter is used to set the secondary TCP port. | Alphanumeric, 4 | <blank> | tcp/1/port |
| SECONDARYTCPTYPE | This parameter is used to set the secondary TCP type. | Alphanumeric, 4 | <blank> | tcp/1/type |
| SECONDARYTCPTIMEOUT | This parameter is used to set the secondary TCP time out. | Numeric, 5 | <blank> | tcp/1/timeout |
| URIPATH | URI Path for TCP/IP header. | Alphanumeric, 128 | ipchapi/rh.aspx | URIPath |
| CONNECTTIMEOUT | This parameter is used to set the transaction connection time out. | Numeric, 6 | 45 seconds | ConnectTimeout |
| RECEIVETIMEOUT | This parameter is used to set the duration for time out, when receiving response from the Host. | Numeric, 6 | 20 seconds | ReceiveTimeout |
| SENDTIMEOUT | This parameter is used to set the duration for time out, when sending request to the Host. | Numeric, 6 | 20 seconds | SendTimeout |
| SSIPROTOCOLENABLED | This parameter is used to enable or disable SSI protocol. |
|
1 | SSIProtocolEnabled |
Rate this article:
