Chase Parameters (CHHC and CHCS)
Last updated: 04-Dec-2024
This section contains parameters those are unique for Chase Canada and Chase US solution.
Chase Canada (CHHC) Parameters
| Config.usr1/Parameter DLD Name | Description | Valid/Max Values | Default Value | Location (Table) |
|---|---|---|---|---|
| MERCHANTID | This parameter represents the Merchant ID, assigned by Chase Canada. NOTE: This parameter has an underscore (_) at the end of the name. | Numeric, 12 | <blank> | Merchants |
| TERMINALID | This parameter represents the Terminal ID, assigned by Chase Canada. NOTE: This parameter has an underscore (_) at the end of the name. | Numeric, 3 | <blank> | Hosts |
| CLIENTID | This parameter represents the Client ID, assigned by Chase Canada. NOTE: This parameter has an underscore (_) at the end of the name. | Numeric, 4 | <blank> | Hosts |
| HOST_USR | This parameter is used to set the host username, assigned by Chase Canada. NOTE: This parameter has an underscore (_) at the end of the name. | Alphanumeric, 100 | <blank> | Hosts |
| HOST_PWD | This parameter is used to set the host password, assigned by Chase Canada. NOTE: This parameter has an underscore (_) at the end of the name. | Alphanumeric, 100 | <blank> | Hosts |
| APPLRELEASEDATE | This parameter is used to set the Application Release Date. | Numeric, 6 | <delivery date> | Application |
| APPLRELEASENAME | This parameter is used to set the Application Release Name. | Alphanumeric, 7 | <CHHC417> | Application |
| CUSTREFNUM | This parameter is used to enable or disable customer reference number. |
|
0 | Application |
| FORCEDEBITKEYRQST | This parameter is used to determine if Force Debit key request from host is required. |
|
1 | Application |
| FORCEEMVPARAMDLD | This parameter is used to determine if Force EMV parameter download is required. |
|
1 | Application |
| POSHWID | This parameter represents POS Hardware ID that SCA Engage must send to Chase. The values should be provided by Chase. The parameter value varies for hardware and updated at device start up based on device type. | Alphanumeric, 4 | <varies per Hardware> | Application |
| POSSWID | This parameter represents POS Software ID that SCA Engage must send to Chase. The values should be provided by Chase. The parameter value varies for application version. | Alphanumeric, 4 | 01FF | Application |
| DYNAMICPWENABLED | This parameter is used to enable or disable Dynamic password flag. NOTE: This parameter has an underscore (_) at the end of the name. |
|
0 | Hosts |
| GIFTPARTIALAUTH | This parameter is used to enable or disable Gift partial authorization flag. NOTE: This parameter has an underscore (_) at the end of the name. |
|
1 | Hosts |
| CTLSIGLINE | This parameter is used to enable or disable Contactless signature line flag. |
|
1 | Application |
| CNTSIGLINE | This parameter is used to enable or disable Contact signature line flag. |
|
1 | Application |
| REFUNDALLOWED | This parameter is used to enable or disable refund operation. |
|
1 | |
| VOIDALLOWED | This parameter is used to enable or disable Void operation. |
|
1 | |
| FORCEALLOWED | This parameter is used to enable or disable Force operation. |
|
1 | |
| TABALLOWED | This parameter is used to enable or disable Tab operation. |
|
1 | |
| AUTHALLOWED | This parameter is used to enable or disable Authorization operation. |
|
1 | |
| DYNAMICPWENABLED | This parameter is used to enable or disable dynamic password. |
|
0 | Hosts |
Chase US (CHCS) Parameters
| Config.usr1/Parameter DLD Name | Description | Valid/Max Values | Default Value | Location (Table) |
|---|---|---|---|---|
| MERCHANTID | This parameter represents the Merchant ID, assigned by Chase US. The parameter value will vary for merchants. NOTE: This parameter has an underscore (_) at the end of the name. | Numeric, 12 characters | <blank> | Merchants |
| TERMINALID | This parameter represents the Terminal ID, assigned by Chase US. The parameter value will vary for merchants. NOTE: This parameter has an underscore (_) at the end of the name. | Numeric, 3 characters | <blank> | Hosts |
| HOST_USR | This parameter is used to set the host username, assigned by Chase US. This will vary for merchants. NOTE: This parameter has an underscore (_) at the end of the name. | Alphanumeric, 100 characters | <blank> | Hosts |
| HOST_PWD | This parameter is used to set the host password, assigned by Chase US. This will vary for merchants. NOTE: This parameter has an underscore (_) at the end of the name. | Alphanumeric, 100 characters | <blank> | Hosts |
| APPLRELEASEDATE | This parameter is used to set the Application Release Date. | Numeric, 6 characters | <delivery date> | Application |
| APPLRELEASENAME | This parameter is used to set the Application Release Name. | Alphanumeric, 7 characters | CHCS411 | Application |
| CUSTREFNUM | This parameter is used to enable or disable customer reference number. | Boolean, 30 characters | none | Application |
| FORCEDEBITKEYRQST | This parameter is used to determine if Force Debit key request from host is required. |
|
1 | Application |
| FORCEEMVPARAMDLD | This parameter is used to determine if Force EMV parameter download is required. NOTE: Force EMV parameter download is always defaulted to 1. |
|
1 | Application |
| ForceNetworkConfigure | This parameter is used to set the flag for force network configuration. |
|
0 | |
| POSHWID | This parameter represents POS Hardware ID that SCA Engage must send to Chase. The values should be provided by Chase. The parameter value varies for hardware and updated at device start up based on device type. | Alphanumeric, 4 characters | 01A4 | Application |
| POSSWID | This parameter represents POS Software ID that SCA Engage must send to Chase. The values should be provided by Chase. The parameter value varies for application version. | Alphanumeric, 4 characters | 021E | Application |
| PARTIALAUTH | This parameter is used to enable or disable partial authorization. NOTE: This parameter has an underscore (_) at the end of the name. |
|
1 | Hosts |
| REFUNDALLOWED | This parameter is used to enable Refund operation. |
|
1 | |
| VOIDALLOWED | This parameter is used to enable or disable Void operation. |
|
1 | |
| FORCEALLOWED | This parameter is used to enable or disable Force operation. |
|
1 | |
| TABALLOWED | This parameter is used to enable or disable Tab operation. |
|
1 | |
| AUTHALLOWED | This parameter is used to enable or disable Authorization operation. |
|
1 | |
| DYNAMICPWENABLED | This parameter is used to enable or disable dynamic password. |
|
0 | Hosts |
Rate this article:
