Skip to main content

SCA Functional Specification

TSYS Parameters

Last updated: 04-Dec-2024

This section contains parameters that are unique for TSYS.

Config.usr1/Parameter DLD Name Description Valid/Max Values Default Value
DIALPABX Dial PBX code. NOTE: This parameter has an underscore (_) at the end of the name. Numeric, 20 [blank]
DIALPHONE Dial-up phone number. NOTE: This parameter has an underscore (_) at the end of the name. Numeric, 20 [blank]
DIALTIMEOUT Transaction timeout for dialed connections. NOTE: This parameter has an underscore (_) at the end of the name. Numeric, 5 [blank]
DIALPARITY Dial: Parity. NOTE: This parameter has an underscore (_) at the end of the name. Alpha, 4 even
DIALDATABITS Dial: Data bits. NOTE: This parameter has an underscore (_) at the end of the name. Numeric, 1 7
DIALSTOPBITS Dial: Stop bits. NOTE: This parameter has an underscore (_) at the end of the name. Numeric, 1 1
DISCLAIMER1 Disclaimer line 1. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric, 40 I AGREE TO PAY ABOVE AMOUNT ACCORDING
DISCLAIMER2 Disclaimer line 2. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric 40 TO THE CARD ISSUER AGREEMENT
DISCLAIMER3 Disclaimer line 3. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric 40 (MERCHANT AGREEMENT IF CREDIT/VOUCHER)
DISCLAIMER4 Disclaimer line 4. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric 40 [blank]
PARM_MID Merchant Gateway ID - This value represents a unique number assigned to a merchant. This number is used for all processing activities. This value can also represent the network gateway through which transactions should be routed. Alphanumeric, 15 [blank]
PARTIALAUTH This parameter is used to enable or disable partial authorization. NOTE: It is necessary to set PartialAuth1=0 in config.$$$ in GID01 to disable partial auth. NOTE: This parameter has an underscore (_) at the end of the name.
  • 0 - Disable
  • 1 - Enable
1
PARM_ADMINURL/PARM_PRIMURL Primary URL. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric, 128 [Gateway demo URL]
PRIMARYCOMMTYPE Communication Type. NOTE: This parameter has an underscore (_) at the end of the name.
  • SERIAL
  • TCP
  • NONE
TCP
PARM_SCNDURL Secondary URL. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric, 128 [Gateway demo URL]
SECONDARYCOMMTYPE Secondary Communication Type. NOTE: This parameter has an underscore (_) at the end of the name.
  • SERIAL
  • TCP
  • NONE
NONE
TAVE
This parameter is used to enable or disable the application to send TA_FLAG in the packet to the UGP gateway (TAVE encryption for FD RC). NOTE: This is not to be confused with the camcore.ini TAVE setting in GID2, which affects SCA in the following manner (Where E=encrypted and C=clear). NOTE: This parameter has an underscore (_) at the end of the name.
  • Camcore.ini TAVE - 0, 1, 2
  • Non-EMV - E, E, E
  • EMV (5F24) - E, C, E
  • CARD_EXP_YEAR - E, E, C
  • 0 - Disable
  • 1 - Enable
0
PARM_TID Terminal ID – represents a device from a specific facility, restaurant, or retail location. Numeric, 8 0
PRIMARYTCPADDRESS Primary TCP address. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric, 200 [blank]
PRIMARYTCPPORT Primary TCP port. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric, 4 [blank]
PRIMARYTCPTYPE Primary TCP type. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric, 4 [blank]
PRIMARYTCPTIMEOUT Primary TCP timeout. NOTE: This parameter has an underscore (_) at the end of the name. Numeric, 5 [blank]
SECONDARYTCPADDRESS Secondary TCP address. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric, 200 [blank]
SECONDARYTCPPORT Secondary TCP port. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric, 4 [blank]
SECONDARYTCPTYPE Secondary TCP type Alphanumeric. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric, 4 [blank]
SECONDARYTCPTIMEOUT Secondary TCP timeout. NOTE: This parameter has an underscore (_) at the end of the name. Numeric, 5 [blank]
URIPATH URI Path. NOTE: This parameter has an underscore (_) at the end of the name. Alphanumeric, 128 ipchapi/rh.aspx

Need help?

Do you have a question? If you didn’t find the answer you are looking for in our documentation, you can contact our Support teams for more information. If you have a technical issue or question, please contact us. We are happy to help.

Not yet a Verifone customer?

We’ll help you choose the right payment solution for your business, wherever you want to sell, in-person or online. Our team of experts will happily discuss your needs.

Verifone logo