SCA Functional Specification

The user can configure the Static connection type by using Com Control Panel (CCP) and following steps are provided with respect to LAN configuration.

Display	Steps Details
	Press 1 5 9 simultaneously on the device to start the application Mac Menu.
	Select Com Control option.
	CCP screen is starting.
	Communication Panel screen displaying the connection status. Select LAN to configure the network.
	LAN configuration page. Select Configuration to configure Network communication.
	Enter password screen is displayed. Enter the required password or reach out to Verifone Contact for actual password and press Ok or Enter.
	Configuration page with the list of actions. Select IPv4 to configure Static connection type.
	Select DHCP option as No.
	Select IP Address.
	Enter IP Address value and press OK.
	Select Subnet Mask.
	Enter Subnet Mask value and press OK.
	Select Gateway IP Address.
	Enter Gateway IP Address value and press OK.
	Select DNS1.
	Enter DNS 1 value and press OK.
	Select DNS2.
	Enter DNS 2 value and press OK.
	All values enter for the configuration.
	Save the details.
	Static connection configuration of LAN is in progress.
	Configuration accepted screen, press OK.
	Select Yes to apply the settings and to start the network interface.
	Staring the configured Network Interface.
	The Static connection for LAN is configured. Press OK and reboot the device to apply the changes and check the status.