SURVEY10
Last updated: 04-Dec-2024
This command directs the device to display up to ten (10) lines of message and prompt for 1-10 response.
Device UI Required: Yes
Request Packet
| Field | Rule | Type | Minimum | Maximum | Value(s) | Description |
|---|---|---|---|---|---|---|
| FUNCTION_TYPE | Required | Static value | N/A | N/A | DEVICE | Type of function. |
| COMMAND | Required | Static value | N/A | N/A | SURVEY10 | Command name |
| DISPLAY_TEXT1 | Optional | Character | 1 | 50 | Display text line 1. Example: HOW WOULD YOU RATE OUR | |
| DISPLAY_TEXT2 | Optional | Character | 1 | 50 | Display text line 2. Example: SERVICE TODAY WITH 10 BEING | |
| DISPLAY_TEXT3 | Optional | Character | 1 | 50 | Display text line 3. Example: BEST AND 1 BEING WORST | |
| DISPLAY_TEXT4 | Optional | Character | 1 | 50 | Display text line 4. | |
| DISPLAY_TEXT5 | Optional | Character | 1 | 50 | Display text line 5. | |
| DISPLAY_TEXT6 | Optional | Character | 1 | 50 | Display text line 6. | |
| DISPLAY_TEXT7 | Optional | Character | 1 | 50 | Display text line 7. | |
| DISPLAY_TEXT8 | Optional | Character | 1 | 50 | Display text line 8. | |
| DISPLAY_TEXT9 | Optional | Character | 1 | 50 | Display text line 9. | |
| DISPLAY_TEXT10 | Optional | Character | 1 | 50 | Display text line 10. | |
| RETURN_SCREEN | Optional | List | 1 | 15 |
|
This field indicates the screens, where after executing the request, the application will return. Default settings for return screen is STAY_CURRENT. |
| POS_RECON | Optional | Character | 1 | 30 | POS reconciliation. POS Reconciliation field to be echoed back in response to POS. Example: RetailPOS1 | |
| COUNTER | Required | Numeric | 1 | 10 | COUNTER is used for a given MAC label. Each COUNTER should be higher than the last one. This is used to authenticate the POS. Example: 100 | |
| MAC | Required | Base64 Encoded Data | N/A | N/A | Message Authentication Code. This is used to authenticate the POS. | |
| MAC_LABEL | Required | Character | 1 | 50 | Associated label that tells the device which MAC_KEY to use to decrypt the value of MAC. This is used to authenticate the POS. Example: REG1 |
Example
Following is an example of request packet
<TRANSACTION>
<FUNCTION_TYPE>DEVICE</FUNCTION_TYPE>
<COMMAND>SURVEY10</COMMAND>
<DISPLAY_TEXT1>HOW WOULD YOU RATE YOUR</DISPLAY_TEXT1>
<DISPLAY_TEXT2>SERVICE TODAY WITH 10 BEING</DISPLAY_TEXT2>
<DISPLAY_TEXT3>BEST AND 1 BEING WORST</DISPLAY_TEXT3>
<COUNTER>1</COUNTER>
<MAC> … </MAC>
<MAC_LABEL>REG2</MAC_LABEL>
</TRANSACTION>
Response Packet
| Field | Type | Value | Description |
|---|---|---|---|
| RESPONSE_TEXT | Character | Processor response text. Example: Survey Captured | |
| RESULT | Character | This indicates the Result details. Example: OK | |
| RESULT_CODE | Numeric | Expected result code, like -1 | This indicates the result code. Refer to Result/Error Codes for details. |
| TERMINATION_STATUS | Character | SUCCESS or FAILURE | This indicates the transaction termination status. This is the overall status of the transaction irrespective of approved or declined. Like, if the output is generated then the status is SUCCESS and if no output is generated then the status will be FAILURE. |
| SURVEY10_DATA | Character | 1 , 2, 3, 4, 5, 6, 7, 8, 9, 10, 0(SKIP) | Returns survey data with selected options. 0 indicates the survey is skipped. |
| POS_RECON | Character | POS reconciliation field echoed back if sent in request. Example: RetailPOS1 | |
| COUNTER | Numeric | Echoes counter sent in the request. Example: 100 |
Example
Following is an example of response packet
<RESPONSE>
<TERMINATION_STATUS>SUCCESS</TERMINATION_STATUS>
<COUNTER>1</COUNTER>
<RESULT_CODE>-1</RESULT_CODE>
<RESULT>OK</RESULT>
<RESPONSE_TEXT>Survey Captured</RESPONSE_TEXT>
<SURVEY10_DATA>7</SURVEY10_DATA>
</RESPONSE>
Rate this article:
