Skip to main content

In-store payments

LAN

Last updated: 10-May-2022
Rate this article:
Step Screen User Action Terminal Action
1.0 comm Select LAN. Terminal prompts to select the desired communication mode.
1.1 dhcp Select either Yes or No.
Terminal prompts to select option for dynamic DHCP configuration.
  • If Yes is selected, proceed to step 1.2.
  • If No is selected, proceed to step 1.4.
1.2 dhcp_configure None. Terminal displays that dynamic DHCP configuration is ongoing.
1.3 dhcp_up User timeout or press enter_key key.
  • Terminal displays that dynamic DHCP interface configuration is successfully done.
    • If enter_key key is pressed, proceed to step 1.1.
1.4 comm_ip_address Enter network IP address and press enter_key key.
  • Terminal prompts to enter the IP address for communication. Proceed to the next step.
    • If timeout happens, goes back to step 1.1.
1.5 subnet_mask Enter subnet mask value and press enter_key key.
  • Terminal prompts to enter the subnet mask value for communication configuration. Proceed to the next step.
    • If timeout happens, goes back to step 1.1.
1.6 gateway_ip_address Enter gateway IP address and press enter_key key.
  • Terminal prompts to enter the gateway IP address value. Proceed to the next step.
    • If timeout happens, goes back to step 1.1.
1.7 dns1 Enter primary DNS value and press enter_key key.
  • Terminal prompts to enter the primary DNS value. Proceed to the next step.
    • If timeout happens, goes back to step 1.1.
1.8 dns2 Enter secondary DNS value and press enter_key key.
  • Terminal prompts to enter the secondary DNS value. The LAN connection is successful. The terminal goes back to 1.1.
    • If timeout happens, goes back to step 1.1.

Rate this article:
Logo of Verifone